Ford Mustang Forum banner

wire harness

  1. Mystery Ground (green wire)

    Classic Tech
    Hello.. Little history first. 68 Mustang, early year. Was a 6cyl is now a 8cyl (engine swap) Wire loom is original and seems in good condition. Ignition plug is the replacement version so has a red/yellow wire tieing into "PINK resistor wire and black/green wire and then there is a Red/pink...
  2. 1996 Explorer 5.0 swap efi standalone question

    5.0L Tech
    **Please reread as i posted this late at night and mixed up a distributor and carb.. yes i was that tired.. but have now fixed it** After gashing my forehead and getting glued up (don't ask) i got a full 5.0 with full harness and etc ... all but the computer as someone had nabbed it before me...
  3. 2000 mustang tranny swap help!!

    V6 Tech
    So this winter i did a little project on my car. I swapped the transmission from an automatic to a standard. I did it all as a project with my dad and we got it all hooked up and i was sure it was going to work perfectly. I got in the car to start it for the first time after the swap. It cranked...
  4. 1965 voltage regulator pigtail (Correct Reproduction)

    Classic Tech
    Hello All, I had some electrical issues on this classic pony; changed the alternator and high voltage regulator out; and it solved a lot of the issues, however the C/D gauge on the instrument cluster is still fluctuating a bit too much for me. In looking further, the 'original' wiring...
  5. 96 mustang 4.6 to a 5.8 swap

    Hi i got a 96 mustang gt whit a 4.6 and i want to put a 5.8 does anyone know what kind of computer Do i need for a manual transmission and if the wire harness from a 95 mustang 5.0 would work?
  6. Need help finding a 2005 v6 mustang headlight wire harness.

    2005-2010 V6 Mustang Tech
    My 2005 v6 mustang was hit in the front end and on impact the headlight/ blinker wire harness had a bunch of cables ripped. I can't find any 2005 mustangs near me being parted on Craigslist either. Does anyone know where I can find the whole main harness including the piece that connects to the...
  7. Question about retrofitting back up lights on a '65 Mustang convertible

    Classic Talk
    This is my first time posting. I have a question. I have a '65 convertible, 289, 3 speed manual, I am restoring. It did not originally have back up lights. However, I want to retro fit it with b/u lights. How do I go about doing this? At some point I will probably change out the under dash wire...
  8. 65 Mustang Radio Connectors

    Hello, I've put in a bunch of radios over the years, but never an original 1965 AM FoMoCo! I'm getting goose-bumps! However, the original radio has the original connectors. I don't want to splice on new connections to a beautiful working factory antique. Can anyone tell me where I can get...
  9. Queston for the turbo EFI guys

    5.0L Tech
    I have a 90 LX 5.0, I have all the wiring removedright now, I want to remove all the wiring from the harness that I don’t need. The car is going to have a turbo, EFI with NO emissions, EGR or HVAC. Do I still need… HEGO wires with a wideband? WOT AC cut out relay (no ac)? Or anything els that I...
  10. starting problem

    4.6L Tech
    hi guy i just did a tranny swap in a 02 gt, everything is swapped over and have no problems besides the stock wireing harness has a lot of unfilled plugs. we went to start it and it wouldent crank, what would e the problem? what needs to be done to the wore harness in order for it to work... thanks
  11. 1996 Mustang HELP

    Audio, Video, Navigation & Alarms
    Hy to all, sorry for my bad english btw, ok i have 1996 mustang v6 and I found two wires under the rear seat not connect, do you know whats is for? and i wanna add simthing like mach 460 system w/o the stereo, did you know where i can find this?? TNX im gonna put some pics later
  12. 1984 Mustang carbureted. I need a engine wiring harness.

    5.0L Tech
    It's a 1984 mustang glx. It's a 5.0 four bbl HO convertible five speed. Most of the wires under the hood are falling apart. The previous owner spliced part of it, where it connects to the harness coming out from the firewall.. I need to find a good harness for a good price. I can't afford the...
  13. Need new wire harness

    5.0L Talk
    So i have an '87 LX which was originally a 4 cyl. the engine, transmission, rear end and full interior was swapped to a '93 5.0L... Now half of the electrical components in the car don't work, my fuel pump is completely rigged in a way to get it so the car runs. Even though the engine and...
  14. Help! Need to find 1985 Mustang GT harness.

    5.0L Talk
    Does anyone know where I can get a full harness for my 85 GT. I need everything, not just the ignition control harness which is all I can find. Thanks.
  15. 1987 Mustang Mass Air Conversion using 1994 Mustang harness

    5.0L Tech
    I have a 1987 speed density car that I'm going to change to mass air. I have the computer and the meter calibrated for stock injectors. I picked up a wire harness from a 1994 mass air car and was wondering how I would go about merging or replacing this harness? Is it even possible, or did I just...
  16. 1989 mustang 5.0 need wiring engine help

    5.0L Tech
    i have a 1989 mustang 5.0 that i need some wiring help on. i am in the process of putting the engine back together aka already together just need help on the wiring. i removed the ac cruise control and smog pump and was wondering how many loose plugs i should have laying around after i get...
  17. 1965 mustang CJ Pony Parts Wire Harness questions

    Classic Tech
    All right so i just bought a full wire harness from headlight to tail light for my 1965 Mustang and i've come through a problem with it so far in my engine bay. I have a black and yellow wire that goes from the alternater to the battery well i also have another black and yellow wire that it...
  18. Shaker 500 to Power Acoustik HU

    2005-2010 Mustang Talk
    I've not been able to locate a harness that will work with the 07 factory wiring and the Power Acoustik HU. Any suggestions would be greatly appreciated. I'm about to simply connect manually butnot sure where to run the single Illumination and tele mute wires. The telemute shouldn't need the...
  19. 1994 Mustang Door lock problems

    V6 Tech
    I had the radio pulled out of the dash. The harness which has the power wire(red) lost its charge. It has to be connected to the yellow wire for the speedometer and door locks to work. With the red wire lacking fire, the door locks will lock but not unlock. When I press the unlock button, the...