01 bullitt vortech braket with intercooler?

835 Views 1 Reply 2 Participants Last post by guy tino, Nov 6, 2012

00BLACKSTANG

Discussion Starter · Nov 1, 2012

Just curious if there is another vortech mounting bracket needed when using a front intercooler? Reason I asked is because I have seen many pictures of 01 bullitts and the supercharger unit is pointing down like to the direction of the cooler, and the other pictures where the supercharger unit is pointing directly to the intake. Or unless the unit can be turned to the direction needed. Any help would be greatly appreciated. this is the only bracket I found from vortech 4FL111-051 that fits 01 bullitt.
Thanks in advance.

Save

1 - 2 of 2 Posts

guy tino

· #2 · Nov 6, 2012

the ont that points to the intake is a t- trim and the one that points to the fender is a s- trim . you can send it to vortech and thay will change it from one to the other . the bracket may be the same but that i do not know

Save

1 - 2 of 2 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month