Ford Mustang Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter · #1 ·
While rebuilding the head I found a small pin in a shaft under the end mount of the rocker arm .Can anybody tell me what the function of this is? It was stuck and I had to drive it out with a small punch.Do I need it or not?
Thanks for any info.
Randall.
 

·
Registered
Joined
·
9 Posts
Discussion Starter · #3 ·
Are you referring to the boss on the head that hold the rocker arm stud.
No,the 200 6 has a rocker shaft that mount to the head.Under the #6 mount pad there a 3/16" shaft drilled at an angle into an oil passage.There was a pin in that shaft,I was able to push out with a small punch.It allmost seems like a check valve,or a restricter of sorts.That mount pad has a cup milled into it,the rest don't.Any info would help.
Thanks,
Randall
 
1 - 3 of 3 Posts
Top