Ford Mustang Forum banner

1965 Coupe 289. No Power

1025 Views 4 Replies 4 Participants Last post by  Ivy66GT
Good Morning,
I know upfront this is a difficult question to answer from a Computer, but I am putting the interior back together from the Paint and I have No Power to anything? No Ignition, No lights, No spark when I hook the Positive cable up. It is like there is no battery ( which I charged and checked ) I have chased wires for seversal days. Any suggestions on something big I could be missing? any ideas would be appreciated. I have re wired alot of the car with New underdash looms, New switches, etc.
1 - 1 of 5 Posts
You need to download a wiring diagram for your car. Main power comes from a wire on the battery side of the solonoid (should be 2 wires there), the heavy one to the battery + terminal and a wire in the harness to a connector on the firewall, then this goes through the firewall to the inside and then powers the other stuff, like ignition switch, fuse panel, light switch etc. Good Luck.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.