Ford Mustang Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
648 Posts
You should be able to remove the door panel from inside car (after removing the handle and stuff) Anyway if you can get to it, there's a rod from the handle that you'll have to pull toward the front of the car and the door should open up. Then you will be able to take a closer look.

There's a metal tab (looks like a two prong fork)just inside the door jamb that holds the lock. It takes a hard tug (after a small pry with a screwdriver), but remove that and take a look at your locking mechanism and all the rods.

A little dab of 3 in 1 oil or WD-40 should free it up so it will turn.
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top