Ford Mustang Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
I am currently rebuilding my drivetrain and am at the point where I need to adjust my shift linkages on my 4-Speed and would appreciate any advice or help.

Thanks,

Nathanael
 

·
Registered
Joined
·
913 Posts
Put the trans in neutral. Loosen the three trunnion bolts where the rods connect to the shifter. Insert a 1/4" pin through the shifter. Tighten the bolts.
 
1 - 2 of 2 Posts
Top