Ford Mustang Forum banner

1967 Mustang Brake Light Problem

1053 Views 5 Replies 3 Participants Last post by  Driveway
A few days ago I replaced my steering wheel rag joint, my tail lights were working before then. Now the tail lights seem to be connected to the emergency flashers because when I have the flashers on the lights on my dashboard light up(constantly when pressed flash when not pressed) but not the tail lights(in either situation). I have voltage go through when the flashers are on but not when they're off. I replaced the brake light switch a week before I replaced the rag joint, so I don't think it's that. I also checked all fuses.

Thank you in advanced, if this wasn't clear I'll try to explain another way.
1 - 1 of 6 Posts

Be sure and check all grounds where you worked on the circuit. Bad grounds can cause strange things..
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.