Ford Mustang Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
The intsrument panel on my 67 Mustang does not work... The fuel gauge is working as well as the lights, brake light, and turning indicators, as well as the lights behind the gauges. However, none of the other gauges are working. Any thoughts of what might be wrong?
 

·
Registered
Joined
·
9,200 Posts
Hello. :) :welcome
The first thing that I would suspect would be the sending units. Start by disconnecting the sending unit wire from the water temp sending unit and ground that wire out on a suitable chassis ground with the key on and see if the gauge pegs. If yes, replace the sending unit. If no, I would check and make sure that the gauge is actually getting power. The problem on these gauges is almost never the gauge itself, but, usually the associated wiring. :)
 
1 - 2 of 2 Posts
Top