Ford Mustang Forum banner

1968 mustang rocker arms to loose and making noise,help me!

1847 6
:headscratch:Ok, I tried tightening down the rocker arms on my 302, because there was a clicking noise coming from them, so I tightened them down and the clicking noise went away. After driving it for about 5 minutes the same noise came back!!! There was one rocker arm in particular that was very loose, and when I went to tight the nut, it wouldn't go down any further and the rocker arm was still loose. The motor is a 302 with solid cam and everything is stock. Please help if anyone has been though this!
Status
Not open for further replies.
1 - 2 of 2 Posts
Are you sure you have a solid cam. Or do you have hydrualic lifters?
If checking what has been stated above & you still have the same problem. Check the one rocker that you suspect, maybe your lifter failed (hyd. lifter, collapsed) and if not I'd look at the Cam maybe having a worn lobe.
1 - 2 of 2 Posts
Status
Not open for further replies.
Top