Ford Mustang Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
Hello i was trying to get some answers on my conversion im doing. Im restoring a 1970 Mustang Coupe that came with a 250CI straight Six i pulled that motor out and already pick and pulled a 302 EFI motor out of a 1993 Grand Marci. Im wanting to purchase a new EFI wire harness from NPD (national parts depot) or Mustang Depot. But im wondering what else i may or may not need to complete this job. The Motor isnt hydrolocked i can rotate the crank continuously with no binding and im aware that i may need to replace the oil pan. Also im wanting to put a TKO T5 Transmission into this as well. Any help on any part i may need to look into replacing due to a bigger motor would be a great deal of help thanks.
 

·
Super Moderator
Joined
·
40,047 Posts
Welcome to the site! I moved your post to the classic section for better results.
 
1 - 2 of 2 Posts
Top