Ford Mustang Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
249 Posts
Discussion Starter #1
After about a 6 week hiatus, I'm back on the assembly of this Mach 1. It appears that the wire harness on my car is NOT for a Mach 1. I am missing, or cannot find the connections for the hood mounted turn signal indicators, sport lamps and brake warning switch. These are supposed to be in the headlight harness under the hood. Funny thing is, the wires for the brake switch (two violet wires)are in the plug at the firewall and they disappear into the wire bundle. So far I havent ripped the harness apart to see where they go. I have to make a decision to either replace the headlight harness and underdash harness (big bucks) or try to add the wires I need to the harness. Any ideas?

Thanks,

Willis
 

·
Registered
Joined
·
831 Posts
Your current harness is at best 41 years old, and at worst, non-stock. Might be best to just bite the bullet and save up for a new harness. If everything works, just add the new wires you need, and start a "Harness Fund" that friends and family can contribute to. :)
 
1 - 2 of 2 Posts
Top