Ford Mustang Forum banner

Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
306 Posts
Discussion Starter #1
I was wondering if anyone knew if i could put 1970 mustang seats into my 1968 coupe. I know that i will have celing clearence but i am unsure if the bolt holes in the floor are the same distance apart from eachother. Can someone tell me if they will work, or give me some measurments so i can measure? That would be great
 

·
Registered
Joined
·
3,166 Posts
They should be a bolt in affair. Even if they aren't all that you would have to do is to drill and tap two holes into the seat frame, as I did when I installed 94 Mustang seats into my 67. I used the 67 seat tracks and the 67 track to seat (special) mounting bolts. The seats are a good fit as the 70 seats should be also.

You will need to use the special bolts, (either the 68 or 70 ones), because the bolt heads are made to clear the track assembly.
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top