Ford Mustang Forum banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
I have a 1985 5.0 Mustang which is the first year for the roller cam and the last year for the carb. I would like to upgrade the cam but I need to know the lift and duration @ .050 of the stock cam. Also does the engine have adjustable valve train?
 

·
Registered
Joined
·
5,907 Posts
This one really belongs in the 5.0L forum. You'll get much better results if you put it over there. I personally don't know the in's and out's of the 5.0 like I know the 4.6.
 

·
Registered
Joined
·
214 Posts
the e cam with 1.6 rockers is good. the rockers are not adjustable stock. you can go with the stock cam and 1.73 cobra rockers which willnet you the same as the f cam.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top