Ford Mustang Forum banner

1988 mustang garrett turbo issues

1414 Views 3 Replies 2 Participants Last post by  evintho
ok, so i have a 1988 ford mustang 2.3. i have swapped in a turbo motor and a 5 speed. car runs good but i feel its lacking some power. with the vam hose unhooked the impeller wheel is visible. the wheel is chewed up somewhat and missing some material that keeps the fins closed up every other fin pattern. turbo is a garrett turbo with part number 1819744C91 and it has tc4305 on it. the intake side is a .70 ar not sure on the exhaust side. i am in need of the intake side wheel and would like to know where to purchase on to replace mine.
Status
Not open for further replies.
1 - 2 of 2 Posts
With a .70 a/r on the intake side it's not off an SVO, TC or XR4ti. T3's came with a .60 a/r. It could be off of anything! A pic would help. Before ordering a new compressor wheel, make sure it's the proper turbo for your motor. Evergreen can give you all the info you need and they also sell compressor wheels.

Evergreen Turbo Co. OEM and High Performance Turbocharges
Everything is bigger than an IHI! Basically, the higher the compressor a/r #, the more air is induced. Take a pic, post it here and talk to the guys at Evergreen. They're very knowlegable.
1 - 2 of 2 Posts
Status
Not open for further replies.
Top