Ford Mustang Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter #1
Hi all. A bit ago we did a swap from a 2.3l to a 5.0l. The cruise control was working just fine prior to the swap. The cruise control will not work at all now and isn't even indicating it's on. We've checked for disconnected wires (we're not sure if they are hooked up properly because I can not find a wiring diagram where the color codes match this car and to note that the steering wheel was never dissassembled), checked all the vacuum lines for leaks and checked the fuse, amplifier and servo. We can't find anything wrong but it still won't work. We've racked our brains trying to figure this one out and I've searched every post on the net that I can find to no availe. Any suggestions? Thanks.
 

·
Registered
Joined
·
4,119 Posts
I have a pdf file (to large to post @ 4.5 MB) with vacuum and wiring for the 1989 Mustang 2.3 and the 5.0 if you're interested.
If you PM me with you email address I'll be more than happy to sent the file to you.
 
1 - 2 of 2 Posts
Top