1989 Mustang 5.0 GT O2 sensor wiring harness help needed

10836 Views 4 Replies 3 Participants Last post by Marunos, Jul 19, 2011

scottda

Discussion Starter · Jul 18, 2011

We've picked up a 1989 Mustang with a 5.0L engine and 5-speed transmission. Unfortunately, there's no wiring harness from the oxygen sensors into the main harness. We need the 8-pin connector schematic for how it connects into the main harness.

We've been scouring forums and all we've been able to find is the EEC pin-out diagram.

Does anyone have the schematic or know where we can find one? Maybe someone has a picture of the connector showing the wiring configuration?

Any help is GREATLY appreciated!

Save

1 - 2 of 5 Posts

MustangBradley

· #2 · Jul 19, 2011

Mustang FAQ - Wiring, Engine, Air Bag, ABS Home Page has the diagram you are looking for.

Welcome to the forum!

Save

MustangBradley

· #4 · Jul 19, 2011

I am pretty sure you'll find a pin-out for the HEGO harness at that link I gave, and be able to match up wire colors with the main harness plug.

The easiest way is to just buy a new HEGO harness. Then you don't have to think at all.

Just plug and go. You can get one cheap at a U-Pull-It yard.

Save

1 - 2 of 5 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month