Ford Mustang Forum banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
225 Posts
Discussion Starter #1
Hi all,

Well, next week I am starting the intake install...I was doing some reading and I came across a thread about baffle sizes on the lower manifolds. Mine has the two smaller ones; one for the PCV and the other for the EGR.

Tmoss posting a template to DIY larger baffle; has anyone tried this? Would my stock 89 lower have the two smaller ones, or the larger one? Right now I am not experiencing much in oil consumption, but I do have some blow-by - Black burst shooting out under heavy acceleration - is this blow-by?

Since I only have a week, is this something I should be concerned with? Or do I install it, see how it goes, then over the winter, if needed, I can make and install the larger baffle?

Thanks,
 

·
Registered
Joined
·
2,003 Posts
a black burst under heavy accelration is probably a shot of richness.

The baffle template is on my website in the download section.
 

·
Registered
Joined
·
225 Posts
Discussion Starter #3
Thanks Tmoss; I've already printed the template off and have it mocked up in the lower intake...
 

·
Registered
Joined
·
46,010 Posts
Tmoss knows his stuff.
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top