Ford Mustang Forum banner

Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
34 Posts
Discussion Starter #1
Replaced all wheel bearings and races in front end of car. Spindles were in good shape still. Torqued down wheel bearing nut, backed off to specs and installed wheels back onto car.

Now question I have is after in put the wheel back on the car and grab it at the 9oclock and 3oclock position and slightly rock it back and forth, there is still a little movement. The entire wheel assy. and shock/strut move. Both sides are the same. The movement is about the same on both sides, don't know if it is normal or something else with suspension.

I am not that good with suspension, so any help would be appreciated. Thanks
 

·
Registered
Joined
·
46,020 Posts
The strut assembly shouldn't be moving like you describe. Take the wheel back off and check for loose bolts or broken mounts.
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top