Ford Mustang Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
152 Posts
Hi,You will need an impact gun to get the alternator pulley off.I didn't have one so I didn't put the alternator pulley on.The water pump pulley is held on with 4 bolts that I think are 10mm or 11mm in size.To determine the belt size this is what I did.I took some string and wrapped it around the pulleys until it touched the end and measured the length.You could also cut your old belt and run it around the pulleys and then measure to see how much of the belt wrapped around pulleys.Remember to have your belt tensioner up to get the propper length
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top