Ford Mustang Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
Hey I own a 1993 Mustang GT. Its all stock with 3:73 gears I just perchased a Holley SysteMax II upper and lower intake with 30lb injectors and a 70mm throttlebody i have gt40 heads a 284r compcam and a powerdyne procharger. Will this setup work with the stock computer? If not how can i get it to work. Any help will be appreciated!
 
R

·
Guest
Joined
·
0 Posts
The computer will adapt......

To get optimum performance have the car dyno'd & a custom chip burned......
 

·
Registered
Joined
·
13,166 Posts
woah! the car will need a tune it will not adapt to the boost at wot. It will cause detonation and break your piston(s) unless you are running an FMU. How much boost?
 
R

·
Guest
Joined
·
0 Posts
woah! the car will need a tune it will not adapt to the boost at wot. It will cause detonation and break your piston(s) unless you are running an FMU. How much boost?
I agree it will need to be tuned....

But with that being said the STOCK computer can be used....

No high dollar stand alone would be needed.....
 

·
Registered
Joined
·
7 Posts
Discussion Starter #6
woah! the car will need a tune it will not adapt to the boost at wot. It will cause detonation and break your piston(s) unless you are running an FMU. How much boost?
I do have a FMU and the boost im not sure of i have a 4lb pulley & a 9lb pulley.
 
1 - 6 of 6 Posts
Top