Ford Mustang Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Aloha,
Had a question about my 2.3 idle speed. Where should it be? At start up it runs about 2100 after a few minutes of warm up it drops to about 1000 rpm. Thanks for your help. And I noticed the throttle body has a sticker that says don't adjust idle screw CCW. Refer to manual. anybody know the proper procedure to fix my idle. under 1000 rpm it has a rough shaky idle. Clean MAF sensor and in the process of pulling throttle body to clean It and also gonna change TPS sensor and ICV sensor.
 

·
Registered
Joined
·
800 Posts
pull codes also. if you dont know how just check my threads, its the 2nd or 3rd one down.
that idle is way too high. should be at 750-800.
you can adjust the stop screw. cant remember the whole thing atm, but a quick google of the site will turn it up.
 
1 - 2 of 2 Posts
Top