Ford Mustang Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
hey guys i was wondering if my vortech v2 charger would bolt up to a 351 cleveland, and if the 351 would bolt up to my transmission and what all i would have to do to make it fit. thanks
 
S

·
Guest
Joined
·
0 Posts
Welcome to AFM! Let me move this to the gurus in the 5.0 section and see what they have to say.

Thanks for joining!
:bigthumbsup
 

·
Banned
Joined
·
12,436 Posts
you'd have to have a custom bracket for the Cleveland to run the Vortech, the T5 transmission would also need a custom bellhousing, D&D transmissions might have what you need for that...now the headers, motor mounts and the rest of a swap would also be a challenge.
Unless you have a 351 Cleveland ready to go, not the best of swaps...the 351 Windsor would be a much better option.
 

·
Banned
Joined
·
7,170 Posts
other than headers the cleveland will bolt right in. the bellhousing is the same and the mount are the same also. for the vortech you would probably need to talk to them.
 
1 - 6 of 6 Posts
Top