Ford Mustang Forum banner

1995 Mustang GT Fuel Pressure reading at 20 PSI, Please help me.

10074 Views 7 Replies 5 Participants Last post by  95_GT_5.0_SD
I am trying to figure out why my fuel pressure is sitting at 20 PSI still, after I changed out my fuel pump, fuel filter, and fuel pressure regulator. It's not misfiring at all. I hooked a gauge up to the fuel rail, and before i changed out parts it read 20 PSI, same with after. Could my factory chip have been flashed at one time or what would cause that low of pressure? Is there anyway to reflash my computer? I had the mufflers cut out a while back to make it louder, would that have done anything? It runs like a champ, but just too low of a pressure reading. Any help is appreciated. Don't want to be buying parts I don't need to fix.
1 - 2 of 8 Posts
Is the gauge you are trying to read fuel pressure with any good?
Fuel system is a closed system. If you already replaced pump, regulator, and filter then only other thing is a blocked line it would seem.

I would disconnect fuel line at both ends and used pressurized air to flush it out. Maybe use some gumout in the fuel tank to clean the system up. May take a few tanks to get it too work.

Surprising you don't have idle/running issues with low fuel pressure.
1 - 2 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.