Ford Mustang Forum banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter · #1 · (Edited)
hello to all...newbe here....my niece has a 87 lx with the 2.3 litre. non turbo....i want to check the ignition timing on it , but the underhood sticker is missing and i don't know how many degrees BTDC or ATDC the timing should be set to....any help appreciated...thankz macmichael
ps...any tips/ advice for this procedure ?...whoops i guess this should be in the 2.3 tech forum...my apologies...
 

·
Registered
Joined
·
15 Posts
Discussion Starter · #3 ·
thankz for the help....i came across 4 different vac/emmision control info diagrams for 87 2.3,s and they all stated ignition timing to be set to 10 degrees btdc...thankz...also there is a wire that has to be disconnected when setting timing, it has a plug that pulls out and acts as a jumper when connected.....the label refers to it as the"in-line spout connector"
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top