Ford Mustang Forum banner

Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
I have a 2.3 with adjustable lifters. in order to keep the solid lifters in place, I drilled holes and put set screws in the head. I ran it a few times , and decided to check the screws, and they had backed out a bit. So in the process of removing them to try lock tight on the screw. I dropped a screw down the oil hole. Not my proudest moment obviously. It sounded like it hit the oil pan, do the holes go straight to the pan or what? any advice?
thanks
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top