Ford Mustang Forum banner

Status
Not open for further replies.
1 - 5 of 5 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter #1
can anyone offer me a somewhat step by step way to remove the dash in my 2000 v6 mustang? all help greatly appriciated
 

·
Registered
Joined
·
11,433 Posts
can anyone offer me a somewhat step by step way to remove the dash in my 2000 v6 mustang? all help greatly appriciated
The way I always approached it was getting a blown up view of the assembly from the Ford Dealer's parts section.

It'll show you where all the fasteners are located.

(Why would you want to remove the dash?)
 

·
Registered
Joined
·
770 Posts
Is there anything special procedure when installing reverse-glow guages?
 

·
Registered
Joined
·
11,433 Posts
Is there anything special procedure when installing reverse-glow guages?
Oh, you don't need to remove the dash, just the gauge bezel.

There are two screws at teh top that are hidden (but you can see where), the tough part is removing the light switch. I had to take it to the dealer -there's a special tool.

They did it for free. but the whole procedure is in the Haynes manual.
 

·
Registered
Joined
·
770 Posts
Yeah I have the HAYNES Repair Manual. It shouldn't be a problem since this books covers everything.
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top