Ford Mustang Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hey guys, I'm new to this. I have a 2000 V6 Mustang, and my windshield wipers have completely stopped working. I have tested my windshield wiper motor and with my wiper switch being completely off my wipers will start to work. As soon as I take the wire I am using to test my windshield wiper motor - they stop working. If I turn my wiper switch on and off, you can hear it clicking at the relay box inside of my hood. I have checked all of my fuses and none of them are bad. I'm not really sure what the problem is .. anybody think they can help? I would appreciate it! Thanks:)
 

·
Registered
Joined
·
90 Posts
Gonna have to break out the voltmeter. Probably need an assistant, if only to turn switch on/off. Even though the relay is clicking, it does not mean it is working 100%.
 

·
Registered
Joined
·
6,859 Posts
Regarding possible failure points. There are two relays for high/low and run/park in the battery junction box (BJB).

The GEM is used to control delay.

The wiring goes through the steering column and stalk which is another possible failure point.

Do the washers work?

Set of wiring diagrams would really help with trouble shooting.
 
1 - 3 of 3 Posts
Top