Alright guys, I've been dealing with this door on my moms 2002 GT for months now and to be honest, it's killin me inside. The driver side door functions normally from all inputs; the key fob, driver switch, and passenger switch. The passenger side door lock on the other hand doesn't respond to any of these switches. I can unlock it by opening the passenger door from the inside and I can lock it by hand, but any electrical function does not work. I ordered an actuator and replaced the passenger side after troubleshooting around here and other sources thinking that's what it had to be but that still didn't fix it. I tried to check the electrical current running to the actuator by placing the needles into each side of the socket that plugs into the actuator. The reading from the meter I bought read ranges from .7 - .1 when I was testing it on the DCV - 20 setting. Does this mean the actuator isn't getting enough power or is this amount sufficient to run an actuator? With that in mind, I ran to Auto Zone to pick up a different actuator thinking the one I already had purchased was faulty but still nothing. I am no expert with wiring and electrical terminology but am I losing/missing voltage somewhere? Any suggestions would help at this point. Thanks guys!