My passenger window crapped out on my 2005 V6 stang. I rolled the window down halfway and 10 minutes after that I had no operation. Checked the main 30 amp fuse #5 and #7, the SJB #6 and the cube relay above but all are normal, checked with a multimeter and everything reads ok. Checked the voltage on the motor connector and im getting the correct voltage. Replaced the motor but before connecting everything back up I plugged the motor in and still no operation, swapped the motor again and put everything back together this time but still nothing. I went though the de-initailization and initialization procedure but the motor still will not move. Checked my owners manual for anything i could have missed but i haven’t found anything.
Side note: When removing original motor and testing the operation I could hear the motor trying to do something, with the new motor I couldn't hear anything at all. Also checked the window switches and all are normal. I'm pretty stumped on this one.
Side note: When removing original motor and testing the operation I could hear the motor trying to do something, with the new motor I couldn't hear anything at all. Also checked the window switches and all are normal. I'm pretty stumped on this one.
