2005 V6 Ford Mustang New Clutch Rattle, Vibration Noise

Welcome and thank you for joining ALLFORDMUSTANGS!
Please read the Site Rules if you haven’t already.
We encourage you to complete your Account Settings.

We are glad you have chosen to be a part of our community and we hope you enjoy your stay.

Unfortunately it's perfectly natural for a shop to screw up and not own up to a mistake. Ask them again; bring donuts this time...

Thank you Yadkin for the reply, Do you think bolts or something could be loose? I am going to talk to the owner next and see what he will do.

Fit4Stang said:

Thank you Yadkin for the reply, Do you think bolts or something could be loose? I am going to talk to the owner next and see what he will do.

Click to expand...

I have no idea. It could be that, or something as simple as a tool left on top of a heat shield. But according to your OP, the noise was not there before the shop did the work, therefore they are best equipped to find and fix the problem.

90lxwhite said:

Exhaust pipes rattling?

Click to expand...

Good guess. The exhaust has to be removed to do tranny work...

I called and said I wanted to talk with the owner and then the shop foreman called me back in the morning and wants me to bring it back. I will let you know what they find out. There was a thread about the same thing that is happening and the guy and his friend pulled the transmission and the fly wheel bolts were finger tight 😳 A couple days after the work was done my car would not start and I was about to jump it off but seen that the positive terminal was loose, I tightened it and then it started right up, maybe they forgot to tighten that up and maybe there are other things that did not get tightened.

For anyone who is having the same issue and stumbles upon this. The issue was with the clutch parts, they had to put a new clutch parts in.