Ford Mustang Forum banner

2006 v6 Mustang. Replacing the O2 Sensor Bank 1, Sensor 1.

6173 Views 4 Replies 3 Participants Last post by  JenPless
I am new at doing my own maintenance. I am putting in a new O2 sensor (Bank 1 Sensor 1) tomorrow. I borrowed a specialty tool from Auto Zone to remove the old one. Any other advice or tips would be greatly appreciated. Thanks!
1 - 1 of 5 Posts
No no no. Stick with a motorcraft; bosch ones can give problems.
bank 1 sensor 1 is passenger side front sensor.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.