2008 GT M/T not starting

863 Views 6 Replies 5 Participants Last post by marylandGT, Sep 23, 2020

angelgtc87

Discussion Starter · Sep 21, 2020

Hello everyone,

I was wondering if anyone can help me with the issue I am having with my 08 GT.

***NEW starter, NEW Alternator, NEW Ignition Switch.

Basically my car won't start, all fuses and relay's are good, when i turn the key my PATS is off so key should be good, F21 in SJB is getting power when key is on start position, from there the wire is supposed to send power to the clutch safety switch, i checked voltage and nothing goes there. If nothing goes to the safety switch then nothing will go to the BEC at starter relay and that relay won't get energized and send signal to the starter I'm thinking.

I'm running out of options and don't know what to do. The funny thing is that it started the other day I put everything together lowered it off the jack and then NOTHING, how can i fix something that comes and goes at it pleases...

Save

1 - 1 of 7 Posts

marylandGT

· #7 · Sep 23, 2020

Have you had water leaks above the SJB. You might want to look into that for corrosion especially the connection going to the clutch safety switch.
Look into the PCM also for any corrosion. You most likely won't see it by taking the cover off and looking at the top of the fuses. Look underneath where the wires are.

Save

1 - 1 of 7 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month