Ford Mustang Forum banner

2008 Mustang GT Air Intake kit

1506 Views 11 Replies 10 Participants Last post by  stlwagon
Does anyone have any information about the High Velocity Intake system by WMS. Instead of a cold air intake kit with tube, i was curious about this system. I havent modded anything on my 2008 black GT/CS, i see most people do the [email protected] intake and tune.
Status
Not open for further replies.
1 - 12 of 12 Posts
Welcome to the site. Lets see if we can get you an answer in here.
Check out the JLT II intake.
The WMS is ok and looks cool but there are better performing intakes.
welcome to the site,enjoy!!!!
Welcome and yes the C&L is a very popular CAI either the street or racer with a SCT tuner are very good.
There's a link fir it. I have seen one but am not sure how they perform. They require some additional work under the hood such as relocating the radiator overflow (I think) so they are not as straight forward to install.

WMS Velocity Tubes -- Western MotorsportS (WMS) -- Dedicated to FORD performance
See less See more
Yeah C+L is one of tha best..
Does anyone have any information about the High Velocity Intake system by WMS. Instead of a cold air intake kit with tube, i was curious about this system. I havent modded anything on my 2008 black GT/CS, i see most people do the [email protected] intake and tune.
Here is a link that compares the different intakes: Cold Air Intake Comparisons - 5.0 Mustang & Super Fords Magazine
See less See more
:bigthumbsup on the JLT- mine performed well before I went F/I.
Thanks for the info. Im probably just gonna go with the [email protected] intake and Xcal 2! i ordered a steeda tri-ax short throw shifter just the other day, i hope i will be impressed with the shorter throws. Does anyone have the mid-muffler system from Pypes for their exhaust?
Thanks for the info. Im probably just gonna go with the [email protected] intake and Xcal 2! i ordered a steeda tri-ax short throw shifter just the other day, i hope i will be impressed with the shorter throws. Does anyone have the mid-muffler system from Pypes for their exhaust?
I ran the mid-muffler system for about 6 weeks and hated it. But I also run an o/r X and long tube headers. Guys with an otherwise stock exhaust seem to like it.
See less See more
1 - 12 of 12 Posts
Status
Not open for further replies.
Top