Ford Mustang Forum banner

2009 Mustang Pictures from Carlisle

2032 Views 34 Replies 13 Participants Last post by  travelers
Here are a few pics I took at Carlisle on Sat. I did find out that the '10 chassie is the same as the the 05-09. The rest is sheetmetal and interior mods. I'll have to try again.

Ok here they are.
Status
Not open for further replies.
1 - 20 of 35 Posts
2009 pics from Carlisle.
I only see three pics. Where are the other 2,006?
Those Shelby's look good.:bigthumbsup
I only see three pics. Where are the other 2,006?
I have to down size the pic to get them on here. I did like the rollover stang.
6
Here are a few more......:hihi:

The 3rd and 4th pics are of AmericanRacing headers Super Snake car. with a few additional mods to over 800hp.

Attachments

See less See more
Good pics there. What is the story with the car on it side?
Good pics there. What is the story with the car on it side?
It was setup so you could see the complete underside. The only difference I saw different is they did away with the exhaust hangers at the trans crossmember. Everything else under the car is the same as the older S197s.
they re all very nice cars. The only thing is the rear-ends im still not use too :/ its going to take awhile for me to start to like the rears on the 2010's..

i love the front of the car. looks very good.:bigthumbsup & the side view is deff awsome!
Here are a few more......:hihi:

The 3rd and 4th pics are of AmericanRacing headers Super Snake car. with a few additional mods to over 800hp.
travelers.. what size motor was the blue mustang? the heads looks :happyhapp very big
It was setup so you could see the complete underside. The only difference I saw different is they did away with the exhaust hangers at the trans crossmember. Everything else under the car is the same as the older S197s.
Thanks for the pics. I forgot about this show... :doh:

I thought they had added a plastic "shroud" from the bumper to the k-member for aerodynamics...
travelers.. what size motor was the blue mustang? the heads looks :happyhapp very big
That's a Boss 429 (or at least the valve covers say so). 429 cid (just north of 7 liters). The Boss 429 is an iconic Mustang. It's Ford's version of a Hemi engine. The engine was build to compete in NASCAR with Chrysler's 426 Hemi.
travelers.. what size motor was the blue mustang? the heads looks :happyhapp very big
That was a '70 BOSS 429. Which is the Ford Hemi motor. I know of a web site for a guy that put one into a S197. looks mean.
Thanks for the pics. I forgot about this show... :doh:

I thought they had added a plastic "shroud" from the bumper to the k-member for aerodynamics...
They did change the one slightly. As you can see it has slots in it.
Wish I could have gone this year. Daughter's highschool graduation took precedence.:)
Anyone know what rims those are on the American Racing Super Snake? Those look great!

bummed I missed the show, I was supposed to be out in Harrisburg for work, but the job got postponed. Maybe next year...
Most of the crowds are on Sat. Fri. and early Sun. are also worth it if you can't make Sat.

Fri. was all rain so I went yesterday, always a great show and Ford Racing had a big presence with techs and the local Ford dealer doing installs.
That was a long drive and how did this become my thread ?
That was a long drive and how did this become my thread ?
I was wondering that to and then I saw that Scott edited it. I sent him a PM to see what was up, but no response yet. It's not a big deal just curious.
I was wondering that to and then I saw that Scott edited it. I sent him a PM to see what was up, but no response yet. It's not a big deal just curious.
That would have been a long and quick drive for me.
That was a '70 BOSS 429. Which is the Ford Hemi motor. I know of a web site for a guy that put one into a S197. looks mean.
I would love to see that web site. Wow a 429 in an S197 cool.
1 - 20 of 35 Posts
Status
Not open for further replies.
Top