Ford Mustang Forum banner

225 60/50 15 Tires

4955 Views 7 Replies 3 Participants Last post by  Jonk67
Hi!

I apologize for the unusual phrasing of the Title of this thread, but does anyone have pictures of a 65 or 66 with either 225 60 15 tires or 225 50 15 tires on Torque Thrust Ds? I'd prefer 225 60s, but am not sure they'd fit. Thanks for your help!

Regards,
/s/ Chris Kennedy
Status
Not open for further replies.
1 - 8 of 8 Posts
I have 225 vr 50 16 Torque Thrust II on 16x8 inch rims with 4.5 backspacing

Look on our website if your interested. Lots of pictures

Good Luck and Be Safe
Ron
Christophers 66 Mustang Restoration and Modification
See less See more
Here is a wheel tire guide from Dodgestang. Your answers are here for wheel/tire size combos

http://www.dodgestang.com/Tire Fitment Guide 65-6.pdf

Good Luck and Be Safe
Ron
See less See more
Here is a wheel tire guide from Dodgestang. Your answers are here for wheel/tire size combos

http://www.dodgestang.com/Tire Fitment Guide 65-6.pdf

Good Luck and Be Safe
Ron
Many thanks once again! I also had fun watching your "first start-up" video. The first time you start a formerly dead or nearly dead car is always a magnificent moment----such a feeling of vindication and power! /s/ Chris :bigthumbsup
See less See more
Thanks!
THAT was a very stressful day! Did not sleep too much the night before worrying about all the stuff that could go wrong. Luckily nothing did except for a BIG scare when the paint burned off the headers in a big black cloud of smoke. Thought the engine caught on fire.

Sorry to hijack your thread.

Good Luck and Be Safe
Ron
Christophers 66 Mustang Restoration and Modification
See less See more
I've got 225/60/15 on my '67 and had to roll my fenders with mideye 4 1/2 leafs, tire tread sits level with fender lip. The bulge of the tire just scraped before rolling and clears now. I think if I would have gone with 215 they may have just cleared w/o rolling? My TT D's are 3.75" bs.
Hope this helps some, I think you have less fender space in '66 than '67.
Jon

Attachments

See less See more
I've got 225/60/15 on my '67 and had to roll my fenders with mideye 4 1/2 leafs, tire tread sits level with fender lip. The bulge of the tire just scraped before rolling and clears now. I think if I would have gone with 215 they may have just cleared w/o rolling? My TT D's are 3.75" bs.
Hope this helps some, I think you have less fender space in '66 than '67.
Jon
Thanks---your car looks fabulous; just the look I want. :shiny:
See less See more
Thanks---your car looks fabulous; just the look I want. :shiny:
Thanks, it's right where I wanted it, fender lip level with tire tread so it doesn't look like there's any light space or room for more tire, going for the TransAm Series look. Front is 560 1" drop springs and 1" shelby/Arning drop. Car is level within 1/4" F/R. As stated, rear is 4 1/2 leaf mideyes. I like the ride, not jarring but pretty tight, planning a 1 1/8" front sway bar next and maybe fabbing a panhard rod for the rear.
Jon
See less See more
1 - 8 of 8 Posts
Status
Not open for further replies.
Top