Ford Mustang Forum banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
I'm doing a 5.8 swap in a 88lx 5.0 T5. I upgraded to mass air, can I swap a 351 with the stock fuel injection from a 90 bronco? Can I just swap engines and use the stock wiring harness from the old motor to plug into the injectors and sensors, Are the harnesses the same? I should be able to just plug in the IAC, TPS coolant sensors and vacum lines, and the fuel injectors? I found a special bracket for the P/S so I can keep the serpentine belt system. This conversion is easy right? Any help would be greatly apreciated!:rolleyes:
 

·
Registered
Joined
·
6 Posts
Discussion Starter · #2 ·
Please disregard my 351 swap posts, I failed to read the already helpful posts here!

Won't happen again, I'll look for similiar posts for answers before I ask silly questions.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top