Ford Mustang Forum banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
203 Posts
Discussion Starter #1
Hey guys:

So ive got a BBK off road H-Pipe on order and is comming in, in 2 days. So I had a look underneath my car to see what kind of job it would be to replace the H-Pipe, any how i noticed that my air tube is welded onto the H-pipe :headscratch:, im going to cut it off where the end of the air tube gets bigger to fit over the tube connected to the H-pipe, but with my new BBK H-Pipe that is comming in, will my factory air tube fit on or will i have to make modifications?

Ive heard other guys doing it and have had a problem with getting the factory air tube onto the air tube on the H-Pipe? :scratchchin

Thanks :bigthumbsup
 

·
Registered
Joined
·
459 Posts
you might have to enlarge the air tube a little , i had to for my mac h-pipe. its easy,only takes a couple minutes
 

·
Registered
Joined
·
1,364 Posts
My BBK H-pipe came with a short piece of hose and hose clamps to connect the air tube.
 

·
Registered
Joined
·
46,020 Posts
You would use the hose that comes with the pipes.
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top