Ford Mustang Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
Help, I have a 1988 5.0 w/man transmission. I am getting no pulse signal to the coil. Have checked and am getting power to both sides. Have changed coil and wires, changed distrubitor with module, both new and set-up together.. Have checked different wiring diagrams and found two different possible wires at the eecm, tan/yellow and dark/green- neither have power coming from them. The ignition module is also getting power and ground. Any help would be a blessing. Thanks, and happy motoring.:kooky:
 

·
Registered
Joined
·
4 Posts
Discussion Starter #3
Nope, I figured it out. It was the eecm relay next to the computer. With all the useful and non-useful info on the web, my neighbor and I found some useful wiring diagrams and we found we lost the ground to the distibutor from the computer, which is supplied by the eecm relay, cleaned the contacts and replaced the relay, and business as normal. Now we going to tackle the T5 trans next. Thanks for the reply and happy motoring.:bigthumbsup
 
1 - 3 of 3 Posts
Top