Ford Mustang Forum banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
237 Posts
Discussion Starter · #1 ·
For front spindles, what years are viable and is there any difference between say a 95 and a 98 spindle/rotor/caliper? What brake lines will I need? Those who have done this to your fox, what kind of wheels are you running? Style, size, offset all numbers would be helpful.
 

·
Registered
Joined
·
2,975 Posts
if you are goin the spindle way, from what i have read the ones to get are 94-95 spindles. the 96-98 spindles are slightly different and will not work with your existing tie rod ends or ball joints one or the other. brake lines will be whichever you get the spindles from assuming you are using the same calipers. if you are just going to go with the V6/GT brakes, then you can run any mustang wheel from 15 and up. if you are goin with cobra brakes, then you willl need 17s or bigger.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top