[buickford]

I have a 69 Grande coupe, 302 auto trans.
I'm trying to remove the passenger fender. I've removed the 6 top bolts, the 1 bolt inside the door opening, the two on the bottom just rear of the front wheel and the one bolt just in front of the wheel.

There appears to be a connection in the front somewhere.

How do I get this thing off? ANy advise or pictures would be helpful

Thanks!

 

[RF Mustang]

Check the small angle bracket that connects the head light extension to the radiator support. It has 4 bolts total. 2- attaching the bracket the HL extension and 2 that attach the bracket to the radiator support

 

[buickford]

It looks like there are 4 screw(bolts) all look like they are bolts that come from in front of the headlight casing. are the 4 bolts or nuts remove from inside the wheel well?

 

[69Emma]

Oh man I had such a hard time taking mine off of my coupe last week. I wish I would have taken pics for you! Like RF said try removing those screws. I was taking my whole front end/grille assembly off so I have to unhook it all anyhow.

 

[buickford]

So do you remove the fender extension screws from the inside of the wheel well?

 

[RF Mustang]

I dont think its a good idea to try and remove the fender extension (headlight extension) from the front fender while its still on the car.

I attached a photo of the radiator support. I show the location you will find the location of the angle bracket we are talking about. I also included an actual photo of the fender extension with the bracket in question attached.

This should make things more easier to find

 

[buickford]

Awesome!, I'll try and remove the fender with the extension attached. I'll let you know how it goes!