Ford Mustang Forum banner

Status
Not open for further replies.
1 - 6 of 6 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter #1
ok i have a 87 mustang 5.0 i want to run braided fuel lines from the tank to the fuel filter and up to the motor and then back. how should i go about doing this and what size lines?
i have a 255 pump trick flow heads e cam 306 cobra intake 38# injectors and a vortech charger
thanks
 
R

·
Guest
Joined
·
0 Posts
ok i have a 87 mustang 5.0 i want to run braided fuel lines from the tank to the fuel filter and up to the motor and then back. how should i go about doing this and what size lines?
i have a 255 pump trick flow heads e cam 306 cobra intake 38# injectors and a vortech charger
thanks
JMO you would be better to spend your money somewhere else

based on the mods you have shown the factory fuel lines will support what you have and then some.....
 

·
Registered
Joined
·
5,170 Posts
I agree with what Reggie said....

And adapting the stock fuel rail and Pick-Up(specially this) to accept the AN fittings can be a headache IMO. You will need to either weld some AN style male fittings on the pick up tubes, or find some adapter fittings to go from push lock to AN.
 

·
Registered
Joined
·
46,010 Posts
If you really want to do this, you'd go with 7/16 feed and 3/8 return.
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top