Ford Mustang Forum banner
Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
430 Posts
This is for rear seat FOLD DOWN :

1. fold seat back down

2. Carefully pry up five pushpins to disengage carpet from seat back.

3. Remove three screws attaching folding arm to seat back.

4. Move seat outboard to disengage from center pivot and remove seat


This is for rear seat - CONVENTIONAL

1. Apply knee pressure to the lower portion of rear seat cushion. Push rearward to disengage seat cushion from retainer brackets.

2. Remove one of the rear quarter armrests, if so equipped, to remove the seat back assembly.

3. Remove the seat back lower retaining screws.

4. Grasp the seat back assembly at the bottom and lift up to disengage the hanger wire from the retainer brackets.

5. Remove the seat back assembly from the vehicle.
 

·
Registered
Joined
·
486 Posts
By the way there aren't 89 Cobras.
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top