Ford Mustang Forum banner
Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
1,230 Posts
Discussion Starter · #1 ·
I am familiar with the vacuum diagram and want to know...

I am not running the EGR tube on the back of my heads. I am not running the smog pump.

The TAD sensor runs a line to the back of the head.
The TAB sensor runs a line to the air pump.

The diagram shows "something" going from the TAD sensor to the TAB sensor. Is that a vacuum line that goes from one to the other? I'm assuming even though I'm not running the EGR tube off the back of my Trick Flow heads nor the air pump, I can still run EGR right?

I know a lot of people on here have debated in whether of not to take off all the EGR. I would still like to be as "friendly" with my gas hog as possible.

Anyone know what lines to plug or redirect? Thanks.
 

Attachments

·
Registered
Joined
·
5,170 Posts
Since you wanna keep the EGR just leave the EGR solenoid and the vac lines that run to it. TAB and TAD may cause a CEL to come on. So you can leave them on, and the Connectors plugged up. All vac lines can be removed from them.
 

·
Registered
Joined
·
5,170 Posts
That line you see is the main vac line for them. Its just split off to feed them both.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top