Ford Mustang Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
I have a 97 mustang that i had put aluminum intake manifold and cam work from comp cams and K&M air filter.

When i get to 5 k i notice a little bit of hesitation i replaced the fuel filter, spark plugs, wires, and coil packs as well as the fuel injectors with the pink ones. 21 bl.

the only thing i haven't changed was the throttle body it is stock

I read that it could be the maf ant it may need to be cleaned

Would sea foaming the throttle body fix my problem?
 

·
Registered
Joined
·
3 Posts
Discussion Starter #3
well it was going to be chipped by a company called Motervation but they could not get it wright. I called CompCams and was told that this cam didn't need to be tuned. That i could just pull the old ones and put these in. I am taking to a mechanic today. I was told to change out the throttle positioning censer but i did and it didn't fix it ether.

I noticed that it only does it when i mash the gas to the floor but if i ease into it it doesn't do it. It kind of feels like the rev limiter but not as fast repetition. It act like it bogs out.
 
1 - 3 of 3 Posts
Top