[Ford.s2live]

Just got a Tremec from behind a '98 Mustang V6. There are way too many people saying you have to do this, and to many people saying you have to do that; Which one. I need a solid answer. I have a '93 Mustang GT with a Borg-Warner T5. I just need to know what I need to do to make it fit. (Tremec Tag: 1352-238)

Also, Can I buy an electronic speedo. and get that to work??

 

[Ford.s2live]

AND it came with the bellhousing and crossmember too.

 

[YLDPONY]

What's in the car right now?

 

[Ford.s2live]

A Borg warner T5

 

[YLDPONY]

Why do you want to do the swap? the trans you have right now has a stronger gearset...

 

[Ford.s2live]

I'll figure it out.

 

[Smurf stang]

Good luck :bigthumbsup

 

[9550gtsblack]

The transmission you have in the car right now has a shorter input shaft than 1998 v6 transmission has. I believe the v6 has 5/8" longer input shaft. It is a direct swap for the 94/95 5.0's but like said earlier the gear set is not as strong an the trans you have in it already. Basicly you will destroy the v6 trans a lot faster the the stock one. So to put the 98 v6 trans in you will need the 94/95 bell housing, a shorter drive shaft so the yoke don't smack the tail housing when the suspension cycles. Those are the main things I have read about.. good luck with the swap if you decide to go with the weaker of the two transmissions. An be ready to pull the v6 trans in a short time to replace it again...