Ford Mustang Forum banner

Status
Not open for further replies.
1 - 11 of 11 Posts

·
Registered
Joined
·
338 Posts
my 07 conv has a factory brace:)
 

·
Premium Member
Joined
·
72,882 Posts
I heard people were snapping the mounts on their bell housing from using torque limiters. Are they even worth it with AOD?
Not so much on an auto. The bellhousing problem was user error. They were overtightening the links.
 

·
Registered
Joined
·
858 Posts
Not so much on an auto. The bellhousing problem was user error. They were overtightening the links.

+1, In the directions each of the 3 sets of bolts had their own torque specs.

My Vert had the A arm brace but i swapped out to the CHE unit because of the torque limiters to the trans. This unit is much more robust than the OEM piece.
 

·
Registered
Joined
·
10,877 Posts
I heard people were snapping the mounts on their bell housing from using torque limiters. Are they even worth it with AOD?
That's why I also installed Prothane motor mounts. If you hold something still in the center and let the motor torque with the soft liquid filled m/m, move you will have a problem if you don't follow there directions to the letter. I did drive my car for a month before I installed the m/m
 
1 - 11 of 11 Posts
Status
Not open for further replies.
Top