Hey, I have a 2016 ford mustang, abs lights tire pressure light, traction control all this lights are coming on and when I press the brake I can fell the abs working. I get a lot of 0415 fault codes, and when I put the car on the scanner to check the abs sensors always the left rear one after a few seconds of driving shows 255km per hour. I changed the sensors around and keep showing me the left right wrong reading. But I don't get a left rear sensor fault code. And I checked I have 12v on the wires. Does the abs module is playing up or does anyone have any ideas how to fix it.
Thanks Vitalij
I assume that you mean U0415 instead of 0415? The letter in front of the number matters.
Are there any other codes or only this one?
U0415 is Invalid Data Received from Anti-Lock Brake System (ABS) Control Module. It's a module to module communication issue. In this case it's from the ABS module to the PCM. The PCM has detected the ABS control module signal input is invalid, missing, erratic, or otherwise falls outside of the expected range.
It could be a wiring/connector issue, a module/pump issue, or an ABS sensor issue.
Inspect all wiring and connectors. Test all the ABS sensors for resistance and continuity. Check for proper voltage on the power circuits and check for proper grounds. Measure the current draw on the ABS pump.
