Ford Mustang Forum banner

Status
Not open for further replies.
1 - 10 of 10 Posts
M

·
Guest
Joined
·
0 Posts
Discussion Starter #1
Hey I was just taking a look at some aftermarket valve covers (afr, trickflow, etc.) but I noticed they dont have the attatchment for the hose that connects to the throttle body. Do you just plug that on the t/b or do you have to get some kind of cap with the hose adapter on it..?
 

·
Registered
Joined
·
5,170 Posts
Trick Flow sells an oil filler tube with the port for the TB. It requires drilling a hole in the VC for it to work.
 

·
Registered
Joined
·
195 Posts
Those AFR's are beautiful...haven;t decided if I am going with the black or polished yet.
Just plug the connector and use a breather instead of an oil cap.
 
M

·
Guest
Joined
·
0 Posts
Discussion Starter #6
yeah i know there awesome! yeah im was tryin to decide also, the blacks are sexy, as well as the polished silver..
 

·
Registered
Joined
·
5,170 Posts
Those AFR's are beautiful...haven;t decided if I am going with the black or polished yet.
Just plug the connector and use a breather instead of an oil cap.
If you do this, and still use the PCV system, it can cause a Lean Condition. It will be drawing air that isnt accounted for by the MAF.
 

·
Registered
Joined
·
1,906 Posts
89coupe, well said. Forgot about the MAF...very true.
 

·
Registered
Joined
·
46,010 Posts
If you do this, and still use the PCV system, it can cause a Lean Condition. It will be drawing air that isnt accounted for by the MAF.
That's experience right there.
 
M

·
Guest
Joined
·
0 Posts
Discussion Starter #10
so what would i have to do to the AFR's to make that hose fit?
 
1 - 10 of 10 Posts
Status
Not open for further replies.
Top