Ford Mustang Forum banner

Status
Not open for further replies.
1 - 7 of 7 Posts

·
Registered
Joined
·
11,432 Posts
StangLx50 said:
Will a 2001 Bullitt rear sway bar fit a 02 v6 Thanks!
any non-IRS suspension part will bolt in the V6. With the exception of the quad shocks

The bullitt sway bar will work just fine.
 

·
Registered
Joined
·
173 Posts
Discussion Starter #3
Thanks Kscoyote, I don't think i've had a single post you didn't respond to, thanks for all your help!
 

·
Registered
Joined
·
11,432 Posts
StangLx50 said:
Thanks Kscoyote, I don't think i've had a single post you didn't respond to, thanks for all your help!
Anytime!

:happyhapp
 

·
Registered
Joined
·
2,579 Posts
You will need to buy two extra bolts. The rear swaybar uses four bolts to mount to the lower control arms and the V6 only comes with two of them.
 

·
Registered
Joined
·
11,432 Posts
Monkey Boy said:
You will need to buy two extra bolts. The rear swaybar uses four bolts to mount to the lower control arms and the V6 only comes with two of them.
I just got 'em off the old car.
 
1 - 7 of 7 Posts
Status
Not open for further replies.
Top