so you dont think the exhaust being less would be a prob uh. thats kinda what i was thinking. i was figuring on running 1.7 rockers with this also to get a little extra lift. but its all just thinking at this point. i also like the extreme energy cams and the nos cams. i know eagle is running one. what do you think of it eagle??
anybody running a comp cams "thunder" serious cam??
i was looking at those and they look ok. but the exhaust has less lift than the intake. i know the exhaust has considerably more duration but i just dont know. also i wish comp cams would show the IVO, IVC, EVO, and, EVC @.050 soo i could see what kind of ramp rate they have. i am looking at the 35-602-8 the "big mutha thumper" cam.
her are the specs i found
THUMPR™ for Small Block Ford Windsor
CAMSHAFT APPLICATIONS
VALVE LIFT @ 1.5:1
LOBE SEP. ANGLE
ADV.
@ .050”
IN.EX.IN.EX.IN.EX.IN.EX.THUMPR™
HYDRAULIC ROLLER High performance street, stock converter ok, best with 2000+ converter and gears, choppy idle
HYDRAULIC ROLLER High performance street/strip, needs 9:1 CR, 2500+ stall, intake, gears, and headers, rough idle
HYDRAULIC ROLLER Street/strip, needs 9.5:1 CR , 2800+ stall, intake, gears, and headers, very rough idle
her are the specs i found
THUMPR™ for Small Block Ford Windsor
CAMSHAFT APPLICATIONS
VALVE SETTING
RPM
RANGE
PART NUMBER
CAM GRIND NUMBER
DURATIONRPM
RANGE
PART NUMBER
CAM GRIND NUMBER
VALVE LIFT @ 1.5:1
LOBE SEP. ANGLE
ADV.
@ .050”
IN.EX.IN.EX.IN.EX.IN.EX.THUMPR™
HYDRAULIC ROLLER High performance street, stock converter ok, best with 2000+ converter and gears, choppy idle
Hyd
Hyd
1900-5600
35-600-8
283THR7
283
303
227
241
.531
.515
107°
MUTHA THUMPR™Hyd
1900-5600
35-600-8
283THR7
283
303
227
241
.531
.515
107°
HYDRAULIC ROLLER High performance street/strip, needs 9:1 CR, 2500+ stall, intake, gears, and headers, rough idle
Hyd
Hyd
2200-5900
35-601-8
291THR7
291
311
235
249
.541
.526
107°
BIG MUTHA THUMPR™Hyd
2200-5900
35-601-8
291THR7
291
311
235
249
.541
.526
107°
HYDRAULIC ROLLER Street/strip, needs 9.5:1 CR , 2800+ stall, intake, gears, and headers, very rough idle
Hyd
Hyd
2500-6200
35-602-8
299THR7
299
319
243
257
.552
.538
107°
Hyd
2500-6200
35-602-8
299THR7
299
319
243
257
.552
.538
107°
- Status
- Not open for further replies.
1 - 2 of 3 Posts
1 - 2 of 3 Posts
- Status
- Not open for further replies.
Ford Mustang Forum
A forum community dedicated to Ford Mustang owners and enthusiasts. Come join the discussion about performance, builds, modifications, reviews, engine swaps, classifieds, troubleshooting, maintenance, and more!
Full Forum Listing
Explore Our Forums
Recommended Communities
